CP7748TL.
Torque Limited in forward and Extreme Torque in reverse
利点Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse One Hand Operation: 2 power setting positions Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle Low sound level Suited for all light vehicle tire changing applications |
特徴1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward 60/70 ft. lbs. - 90/100 Nm in torque limited position in forward 920 ft.lbs - 1,250Nm of maximum torque in reverse Aluminum clutch & rear housings Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops Universal & durable twin hammer mechanism Full teasing trigger 360° swivel air inlet The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly. Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors. |
オーダー番号 | 8941077484 |
---|---|
型式 | CP7748TL. |
ソケット部四角寸法 | 1/2 インチ |
ソケット部四角寸法 | 1/2 インチ |
廃盤 | はい |
全長 | 200 mm |
全長 | 7.8 インチ |
重量 | 2.2 kg |
重量 | 4.8 lb |
軸心より外側までの長さ | 38 mm |
軸心より外側までの長さ | 1 1/2 インチ |
空気消費量の平均値 | 5 1/2 立法フィート |
空気消費量の平均値 | 2 1/2 l/s |
空気消費量 | 22 立法フィート |
空気消費量 | 10 l/s |
給気口ねじ寸法 | 1/4 nptfin |
ホース内径 | 10 mm |
ホース内径 | 3/8 インチ |
騒音レベル | 86 db(A) |
音響パワーレベル | 97 db(A) |
振動 ISO | ISO-28927-2 |
振動 | 4.8 m/s² |
振動の不確実性 | 1 1/2 m/s² |
ハンドルタイプ | ピストル |
ワーキングトルク範囲 (正回転) | 90 - 140 Nm |
ワーキングトルク範囲 (正回転) | 66 - 103 ftlbs |
最大トルク | 1250 Nm |
最大トルク | 920 ftlbs |
無負荷回転数 | 8200 rpm |
1分間あたりの打撃数 | 850 |
パワーウエイトレシオ | 568.2 Nmkg |
パワーウエイトレシオ | 192.1 ftlblb |
ソケット用アンビルタイプ | 摩擦リング |
ハンマ機構 | Twin Hammer |
欧州規格 | EN ISO 11148-6:2013 |