CP7748TLK
Torque Limited in forward and Extreme Torque in reverse + Modular and Convenient
收益Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse One Hand Operation: 2 power setting positions Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle Low sound level Suited for all light vehicle tire changing applications Can be transportable as a tool box Removable foam insert to be placed in a rolling cabinet drawer High quality composite case supplied a bi-material handle and composite latches |
特性1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward 60/70 ft. lbs. - 90/100 Nm in torque limited position in forward 920 ft.lbs - 1,250Nm of maximum torque in reverse Aluminum clutch & rear housings Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops Universal & durable twin hammer mechanism Full teasing trigger 360° swivel air inlet 3 Wheel Sockets included / 17 – 19 & 21 mm 80 mm length, with anti-scratch protection, extra thin-walled for alloy rims, painted rims and polished cap nuts High quality composite case supplied a bi-material handle and composite latches The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly. Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors. |
零件号 | 8940173405 |
---|---|
型号 | CP7748TLK |
方头驱动 | 1/2" |
方头驱动 | 1/2" |
停产 | 是 |
长度 | 200 mm |
长度 | 7.8" |
重量 | 2.2 kg |
重量 | 4.8 lb |
边缘至中心 | 38 mm |
边缘至中心 | 1 1/2" |
平均耗气量 | 5 1/2 cfm |
平均耗气量 | 2 1/2 l/s |
实际耗气量 | 22 cfm |
实际耗气量 | 10 l/s |
进气口螺纹尺寸 | 1/4" |
最小软管尺寸 | 10 mm |
最小软管尺寸 | 3/8" |
噪声级 | 86 db(A) |
声功率 | 97 db(A) |
振动 ISO | ISO-28927-2 |
振动 | 4.8 m/s² |
振动 K | 1 1/2 m/s² |
握把类型 | 手枪式 |
工作扭矩范围(正转) | 90 - 96 Nm |
工作扭矩范围(正转) | 66 - 70 ft.lbs |
最大扭矩(反转) | 1250 Nm |
最大扭矩(反转) | 920 ft.lbs |
空载转速 | 8200 转速 |
每分钟打击次数 | 850 |
功率重量比 | 568.2 Nm/kg |
功率重量比 | 192.1 ft.lb/lb |
套筒定位器 | 摩擦环 |
冲击器类型 | Twin Hammer |
欧洲标准 | EN ISO 11148-6:2013 |