CP7748TLK
Torque Limited in forward and Extreme Torque in reverse + Modular and Convenient
BenefíciosTorque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse One Hand Operation: 2 power setting positions Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle Low sound level Suited for all light vehicle tire changing applications Can be transportable as a tool box Removable foam insert to be placed in a rolling cabinet drawer High quality composite case supplied a bi-material handle and composite latches |
Características1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward 60/70 ft. lbs. - 90/100 Nm in torque limited position in forward 920 ft.lbs - 1,250Nm of maximum torque in reverse Aluminum clutch & rear housings Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops Universal & durable twin hammer mechanism Full teasing trigger 360° swivel air inlet 3 Wheel Sockets included / 17 – 19 & 21 mm 80 mm length, with anti-scratch protection, extra thin-walled for alloy rims, painted rims and polished cap nuts High quality composite case supplied a bi-material handle and composite latches The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly. Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors. |
Número da peça | 8940173405 |
---|---|
Modelo | CP7748TLK |
Impulsor Quadrado | 1/2" |
Impulsor Quadrado | 1/2" |
Descontinuado | sim |
Comprimento | 200 mm |
Comprimento | 7.8" |
Peso líquido | 2.2 kg |
Peso líquido | 4.8 lb |
Lado ao centro | 38 mm |
Lado ao centro | 1 1/2" |
Consumo médio de ar | 5 1/2 cfm |
Consumo médio de ar | 2 1/2 l/s |
Consumo real de ar | 22 cfm |
Consumo real de ar _ls | 10 l/s |
Tamanho da rosca da entrada de ar | 1/4" |
Tamanho min. mangueira | 10 mm |
Tamanho min. mangueira | 3/8" |
Nível de ruído | 86 db(A) |
Potência do Ruído ISO15744_dB(A) | 97 db(A) |
Vibração ISO | ISO-28927-2 |
Vibração | 4.8 m/s² |
Vibração K | 1 1/2 m/s² |
Tipo punho | Pistola |
Faixa de torque de trabalho (para frente) | 90 - 96 Nm |
Faixa de torque de trabalho (para frente) | 66 - 70 pés.lbs |
Torque Máximo (reverso) | 1250 Nm |
Torque Máximo (reverso) | 920 pés.lbs |
Velocidade livre | 8200 rpm |
Sopros por minuto | 850 |
Relação potência/peso | 568.2 Nm/kg |
Relação potência/peso | 192.1 pés.lb/lb |
Retentor de soquete | Anel de fricção |
Tipo de embreagem | Twin Hammer |
Padrões Europeus | EN ISO 11148-6:2013 |