CP7748TLK
Torque Limited in forward and Extreme Torque in reverse + Modular and Convenient
BenefitsTorque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse One Hand Operation: 2 power setting positions Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle Low sound level Suited for all light vehicle tire changing applications Can be transportable as a tool box Removable foam insert to be placed in a rolling cabinet drawer High quality composite case supplied a bi-material handle and composite latches |
Features1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward 60/70 ft. lbs. - 90/100 Nm in torque limited position in forward 920 ft.lbs - 1,250Nm of maximum torque in reverse Aluminum clutch & rear housings Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops Universal & durable twin hammer mechanism Full teasing trigger 360° swivel air inlet 3 Wheel Sockets included / 17 – 19 & 21 mm 80 mm length, with anti-scratch protection, extra thin-walled for alloy rims, painted rims and polished cap nuts High quality composite case supplied a bi-material handle and composite latches The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly. Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors. |
| Part number | 8940173405 |
|---|---|
| Model | CP7748TLK |
| Square drive | 1/2" |
| Square drive | 1/2" |
| Discontinued | yes |
| Length | 200 mm |
| Length | 7.8" |
| Net weight | 2.2 kg |
| Net weight | 4.8 lb |
| Side to center | 38 mm |
| Side to center | 1 1/2" |
| Average air consumption | 5 1/2 cfm |
| Average air consumption | 2 1/2 l/s |
| Actual air consumption | 22 cfm |
| Actual air consumption | 10 l/s |
| Air inlet thread size | 1/4" |
| Min. hose size | 10 mm |
| Min. hose size | 3/8" |
| Sound pressure | 86 db(A) |
| Sound Power | 97 db(A) |
| Vibration ISO | ISO-28927-2 |
| Vibration | 4.8 m/s² |
| Vibration uncertainty (K) | 1 1/2 m/s² |
| Handle type | Pistol |
| Working Torque Range (fwd) | 90 - 96 Nm |
| Working Torque Range (fwd) | 66 - 70 ft.lbs |
| Maximum Torque (reverse) | 1250 Nm |
| Maximum Torque (reverse) | 920 ft.lbs |
| Free speed | 8200 rpm |
| Blows per minute | 850 |
| Power/weight ratio | 568.2 Nm/kg |
| Power/weight ratio | 192.1 ft.lb/lb |
| Socket retainer | Friction ring |
| Clutch type | Twin Hammer |
| European Standards | EN ISO 11148-6:2013 |
