Measurement Unit

 

CP7732C

Tool documentation Back

CP7732C

Ultra Lightweight, Easy operation and Compact

CP7732CCP7732CCP7732CCP7732CCP7732CCP7732CCP7732C

Benefits

Ultra Lightweight
Easy operation
Compact
Powerful
Durable

Features

2.1 lbs. – 1.0 Kg
460 ft.lbs - 625 Nm of maximum torque in reverse
4 1/4 in – 108 mm length
Jumbo hammer mechanism
Steel motor
Aluminum clutch housing
Composite housing with curved handle with Thermo-Plastic Rubber injected
S2S: 1 hand Forward – Reverse operation
New power setting system: 1 hand-operation behind the trigger
2 positions in reverse: max and lower torque
2 positions in forward: max and low torque
Socket retainer ring
Full teasing trigger
Measurement Unit
Part number 8941077321
Model CP7732C
Square drive 1/2"
Square drive 1/2"
Length 108 mm
Length 4.3"
Net weight 1 kg
Net weight 2.2 lb
Side to center 32 mm
Side to center 1.26"
Average air consumption 5 1/2 cfm
Average air consumption 2.6 l/s
Actual air consumption 22 cfm
Actual air consumption 10.2 l/s
Free speed air consumption 14.6 l/s
Air inlet thread size 1/4"
Min. hose size 10 mm
Min. hose size 3/8"
Sound pressure 95.5 db(A)
Sound Power 106.5 db(A)
Vibration ISO ISO-28927-2
Vibration 10.8 m/s²
Vibration uncertainty (K) 1.42 m/s²
Handle type Pistol
Working Torque Range (fwd) 70 - 387 Nm
Working Torque Range (fwd) 52 - 285  ft.lbs
Maximum Torque (reverse) 625 Nm
Maximum Torque (reverse) 460 ft.lbs
Free speed 9410 rpm
Blows per minute 1400 
Socket retainer Friction ring
Clutch type Jumbo
European Standards EN ISO 11148-6:2013

Close the window
Close the window
HAMMER PIN (SET of 2)

HAMMER FRAME

HAMMER

HOUSING

BLADES SET(6)

CYLINDER

ROTOR

HAMMER CASE KIT

ANVIL KIT

SOCKET RETAINING KIT - 1/2" (SET OF 5)

SCREW KIT

FRONT PLATE KIT

REAR PLATE KIT

TRIGGER KIT

REVERSE KIT

REGULATOR KIT

THROTTLE VALVE KIT

INLET KIT

SMALL PARTS KIT

TUNE-UP KIT

WARNING LABEL GENERAL

PROTECTIVE COVER CP7732C

Close the window
Close the window

Tool documentation