CP7748TL.
Torque Limited in forward and Extreme Torque in reverse
장점Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse One Hand Operation: 2 power setting positions Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle Low sound level Suited for all light vehicle tire changing applications |
기능1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward 60/70 ft. lbs. - 90/100 Nm in torque limited position in forward 920 ft.lbs - 1,250Nm of maximum torque in reverse Aluminum clutch & rear housings Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops Universal & durable twin hammer mechanism Full teasing trigger 360° swivel air inlet The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly. Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors. |
품번 | 8941077484 |
---|---|
제품번호 | CP7748TL. |
스퀘어 드라이브 | 1/2" |
스퀘어 드라이브 | 1/2" |
생산 중단 | 예 |
길이 | 200 mm |
길이 | 7.8" |
순 무게 | 2.2 kg |
순 무게 | 4.8 Ib |
측면부터 중심까지 거리 | 38 mm |
측면부터 중심까지 거리 | 1 1/2" |
평균 에어 소모량 | 5 1/2 cfm |
평균 에어 소모량 | 2 1/2 l/s |
실제 에어 소비량 | 22 cfm |
실제 에어 소비량 | 10 l/s |
에어 인렛 사이즈 | 1/4 nptfin |
최소 호스 규격 | 10 mm |
최소 호스 규격 | 3/8" |
소음 수치 | 86 db(A) |
음향 파워 | 97 db(A) |
진동 ISO | ISO-28927-2 |
진동 | 4.8 m/s² |
진동 불확실성(K) | 1 1/2 m/s² |
핸들 타입 | 피스톨 |
작업 토크 범위(정방향) | 90 - 140 Nm |
작업 토크 범위(정방향) | 66 - 103 ft.lbs |
최대 토크(역방향) | 1250 Nm |
최대 토크(역방향) | 920 ft.lbs |
무부하속도 | 8200 rpm |
분당토출량 | 850 |
전력중량비 | 568.2 Nmkg |
전력중량비 | 192.1 ft.lb/lb |
소켓 리테이너 | 프릭션 링 |
클러치 타입 | Twin Hammer |
유럽표준 | EN ISO 11148-6:2013 |