Maateenheid

 

CP7748TLK

Uit productie
Terug

CP7748TLK

Torque Limited in forward and Extreme Torque in reverse + Modular and Convenient

CP7748TLK

Voordelen

Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse
One Hand Operation: 2 power setting positions
Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle
Low sound level
Suited for all light vehicle tire changing applications

Can be transportable as a tool box
Removable foam insert to be placed in a rolling cabinet drawer
High quality composite case supplied a bi-material handle and composite latches

Eigenschappen

1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward
60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
920 ft.lbs - 1,250Nm of maximum torque in reverse
Aluminum clutch & rear housings
Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops
Universal & durable twin hammer mechanism
Full teasing trigger
360° swivel air inlet

3 Wheel Sockets included / 17 – 19 & 21 mm
80 mm length, with anti-scratch protection, extra thin-walled for alloy rims, painted rims and polished cap nuts
High quality composite case supplied a bi-material handle and composite latches

The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly.
Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.
Maateenheid
Onderdeelnummer 8940173405
Model CP7748TLK
Vierkante aandrijving 1/2"
Vierkante aandrijving 1/2"
Uit productie ja
Lengte 200 mm
Lengte 7.8"
Netto gewicht 2.2 kg
Netto gewicht 4.8 lb
Zijkant naar midden 38 mm
Zijkant naar midden 1 1/2"
Gemiddeld luchtverbruik 5 1/2 cfm
Gemiddeld luchtverbruik 2 1/2 l/s
Feitelijk luchtverbruik 22 cfm
Feitelijk luchtverbruik 10 l/s
Draadgrootte luchtinlaat 1/4"
Min. slanggrootte 10 mm
Min. slanggrootte 3/8"
Geluidsniveau 86 db(A)
Geluidvermogen 97 db(A)
Trilling ISO ISO-28927-2
Trilling 4.8 m/s²
Trilling K 1 1/2 m/s²
type hendel Pistool
Werkmomentbereik (vwrts) 90 - 96 Nm
Werkmomentbereik (vwrts) 66 - 70 ft.lbs
Maximale koppel (achteruit) 1250 Nm
Maximale koppel (achteruit) 920 ft.lbs
Vrije snelheid 8200 tpm
Slagen per minuut 850 
Stroom/gewicht-verhouding 568.2 Nm/kg
Stroom/gewicht-verhouding 192.1 ft.lb/lb
Borgring mof Glijring
Koppelingstype Twin Hammer
European Standards EN ISO 11148-6:2013

Sluit het venster
Sluit het venster
ROTOR

ROTOR BLADE (SET OF 7)

CYLINDER

HAMMER CAGE

HAMMER

PIN (SET OF 2)

REVERSE VALVE REAR COVER KIT

INLET KIT

REAR END PLATE KIT

FRONT END PLATE KIT

ANVIL KIT

ANVIL COLLAR KIT (SET OF 5)

SMALL PARTS KIT

GASKET KIT

HOUSING KIT

TUNE UP KIT

PROTECTIVE COVER CP7748 E

HAMMER CASE KIT

S417MWP 1/2"DR WHEEL PROT IMPACT 17MM

S419MWP 1/2"DR WHEEL PROT IMPACT 19MM

S421MWP 1/2"DR WHEEL PROT IMPACT 21MM

Sluit het venster
Sluit het venster

Documentatie voor gereedschap