Unidade de medição

 

CP7748TL-2K

Suporte

CP7748TL-2K

Torque Limited in forward and Extreme Torque in reverse + Modular and Convenient

Benefícios

Torque limited in forward: 60/70 ft. Lbs. - 90/100 Nm
Full power in reverse
One Hand Operation: 2 power setting positions
Insulation & Comfort: Contoured comfort grip handle instead of TPR injected in handle
Low sound level
Suited for all light vehicle tire changing applications

Can be transportable as a tool box
Removable foam insert to be placed in a rolling cabinet drawer
High quality composite case supplied a bi-material handle and composite latches

Características

1/2" composite impact wrench with friction ring socket retainer
2 setting positions : one in Reverse and one Torque Limited in forward
60/70 ft. lbs. - 90/100 Nm in torque limited position in forward
920 ft.lbs - 1,250Nm of maximum torque in reverse
Aluminum clutch & rear housings
Thermo-plastic rubber injected in housing - Resistant to most chemicals used in workshops
Universal & durable twin hammer mechanism
Full teasing trigger
360° swivel air inlet

3 Wheel Sockets included / 17 – 19 & 21 mm
80 mm length, with anti-scratch protection, extra thin-walled for alloy rims, painted rims and polished cap nuts
High quality composite case supplied a bi-material handle and composite latches

The CP7748TL series is intended to be used as a “snugging” tool prior to final tightening with a calibrated torque wrench to reach the car manufacturer’s specified torque rating for wheel assembly.
Torque results vary greatly depending on the type of wheel, air pressure, run time and many other factors.
Unidade de medição
Número da peça 8940173408
Modelo CP7748TL-2K
Impulsor Quadrado 1/2"
Impulsor Quadrado 1/2"
Comprimento 250 mm
Comprimento 9.8"
Peso líquido 2.4 kg
Peso líquido 5.3 lb
Lado ao centro 38 mm
Lado ao centro 1 1/2"
Consumo médio de ar 5 1/2 cfm
Consumo médio de ar 2 1/2 l/s
Consumo real de ar 22 cfm
Consumo real de ar _ls 10 l/s
Tamanho da rosca da entrada de ar 1/4"
Tamanho min. mangueira 10 mm
Tamanho min. mangueira 3/8"
Nível de ruído 86 db(A)
Potência do Ruído ISO15744_dB(A) 97 db(A)
Vibração ISO ISO-28927-2
Vibração 4.8 m/s²
Vibração K 1 1/2 m/s²
Tipo punho Pistola
Faixa de torque de trabalho (para frente) 90 - 96 Nm
Faixa de torque de trabalho (para frente) 66 - 70 pés.lbs
Torque Máximo (reverso) 1250 Nm
Torque Máximo (reverso) 920 pés.lbs
Velocidade livre 8200 rpm
Sopros por minuto 850 
Relação potência/peso 520.8 Nm/kg
Relação potência/peso 174 pés.lb/lb
Retentor de soquete Anel de fricção
Tipo de embreagem Twin Hammer
Padrões Europeus EN ISO 11148-6:2013

Fechar a janela
Fechar a janela
Fechar a janela
Fechar a janela

Documentação da ferramenta